HomeCarpet Area vs. Built Up Area vs. Super Built Up AreaLiving in an ApartmentCarpet Area vs. Built Up Area vs. Super Built Up Area

Carpet Area vs. Built Up Area vs. Super Built Up Area

Difference between Carpet Area, Built Up Area, and Super Built Up Area

Looking for a new home or planning to invest in real estate? When it comes to understanding property measurements, things can get confusing. Terms like ‘carpet area’, ‘built-up area’, and ‘super built-up area’ are often used interchangeably, leaving many buyers feeling uncertain about what they’re getting. Understanding the differences between these terms is key to making an informed decision when buying or renting a property. In this blog post, we’ll take you through everything you need to know about carpet area, built-up area, and super built-up area – so that your next purchase can be both exciting and stress-free!

Carpet Area, Built-Up Area, Super Built-Up Area Calculation

Carpet Area

A carpet area is the net area of a property that can be covered with a carpet. It includes only the usable floor space and does not include common areas such as lobbies, staircases, lifts, or balconies. The measurement is taken from wall to wall using a measuring tape and is usually expressed in square feet or square meters.

Understanding the carpet area of your potential home is crucial because it determines how much actual living space you will have. This area helps you determine how many rooms can fit into the apartment and what furniture would fit inside each room without overcrowding it.

Another important factor to consider when looking at carpet areas is that they differ from builder to builder, so always check whether the developer’s claim matches up with reality before buying any property.

In general, if you are looking for an affordable option and don’t need too much extra space, then choosing an apartment based on its carpet area might be perfect for you!

Built-Up Area

Built-Up Area is the sum total of all areas covered by a building’s walls. It includes carpet areas as well as areas that are shared among multiple apartments or units in the building such as lobbies, staircases, elevators, etc. This means that the built-up area also includes the thickness of inner and outer walls, balconies, and verandas.

Calculating the Built Up Area is important for property buyers since it helps them understand how much space they will actually be getting within the apartment. Builders often include common spaces when advertising their projects which can make it difficult to compare with other properties.

To calculate the Built Up Area you need to add the Carpet Area plus any additional areas like balconies, utility rooms or corridors. This information should be available on your flat layout plan or sale agreement from your builder.

It’s important to note that some builders may use different terms like ‘PLC’ (preferential location charge) while calculating prices based on the built-up area so it’s always best to clarify before making any payment towards a property purchase.

Super Built-Up Area

Super Built Up Area, also known as the Saleable or Plinth Area, is a term used frequently in real estate. It is the total area of your apartment that includes not only the carpet area but also common areas like lifts, stairs, and lobbies.

In simpler terms, Super Built Up Area refers to the space available for sale including all shared spaces. For example, if you are buying an apartment with a Super Built Up Area of 1000 sq.ft., it means that apart from your actual living space (Carpet Area), you will have access to other facilities like corridors and elevators which may add another 200-300 sq.ft.

The Super Build-Up Area can sometimes be misleading too as developers tend to include balconies and terraces along with charged common amenities such as swimming pools or clubhouses in this measurement too. Therefore always clarify what exactly comes under this category before making any purchase.

It’s essential to understand all these areas while purchasing any property as they help buyers make an informed decision about their investment.

How to calculate the Carpet Area?

Calculating the carpet area is an essential step when it comes to buying or renting a property. It refers to the actual area that can be covered with a carpet and excludes all other areas like walls, balconies, etc. Here’s how you can calculate it:

Firstly, measure the length and width of each room using a measuring tape. Make sure to take accurate measurements.

Next, multiply the length and width measurements of each room to get its square footage.

Add up the square footage of all rooms in your home or apartment.

Subtract any space taken up by built-in furniture like wardrobes or cabinets as well as any common areas shared with other residents such as staircases or hallways.

The resulting number will be your carpet area which is used for calculating rent prices or determining what size carpets are needed for your new property. Remember that knowing how to calculate this figure accurately can save you from being overcharged on rent!

How to Calculate the Built-Up Area?

Calculating the built-up area of a property is essential when you are planning to buy or rent it. This calculation helps in determining the actual space that will be available for use inside the property.

To calculate the built-up area, one needs to add the carpet area and wall thickness together. The wall thickness is calculated by measuring the distance from one outer edge of a wall to another. This measurement should be taken on both sides of each wall and then averaged out.

Once you have obtained the total wall thickness, add this number to your carpet area. The result will give you your property’s built-up area, which includes all enclosed spaces such as rooms, hallways, bathrooms, and kitchens.

It is important to keep in mind that different builders may use different methods while calculating their properties’ built-up areas. Therefore, it’s always wise to double-check with them before making any final decision based on these calculations alone.

Understanding how to calculate built up-areas can help ensure that you are getting what you pay for and avoid confusion down-the-line about how much space there actually is within a particular property.

How to calculate the Super Built Up Area?

The Super Built Up Area, also known as the saleable area or the plinth area, is the total built-up space that you get when you add common areas, such as staircases and elevators to your personal living space. To calculate this area, it’s essential to know what comprises these common areas.

Firstly, measure your flat’s carpet area and then find out how much additional space has been added in terms of common facilities. This includes balconies or terraces outside the apartment but within its walls. Once you have this data handy, add up all those portions that are not part of your flat but still contribute to its overall value.

To calculate a rough estimate for super built-up areas next step is finding out how much per square foot they charge for these areas. If it’s ₹1000 per sq ft and if there’s an additional 100 sq ft of elevator lobby on each floor (assuming six floors), then this will be charged at ₹1 lakh in addition to any other amenities charges like swimming pool or gymnasium which may vary from project-to-project based on their offerings.

Moreover, it’s important to note that developers often use a combination of methods while calculating super-built-up areas so it can differ between projects. Hence it is vital always to check with them before making any purchase decisions!


To sum it up, when purchasing a property or renting one, it is essential to understand the different areas involved. The carpet area represents the actual living space inside your apartment. The built-up area includes carpet area as well as walls and other fixtures while the super built-up area incorporates common spaces like corridors, elevators, lobbies, etc.

It is important to calculate these areas correctly so that you know what you are paying for. A good understanding of these concepts can also help in comparing properties with each other and making an informed decision.

Knowing about Carpet Area, Built-Up Area, and Super Built-Up Area will not only make you a more informed buyer but also prevent any future misunderstandings between buyers and sellers. So next time you consider buying or renting an apartment do keep these things in mind!

Leave a Reply

Your email address will not be published. Required fields are marked *

Company Profile


66- Riddhi Siddhi Enclave, Gyan Vihar Road, Jagatpura, Jaipur.

© 2024 · Somya Buildcon. All Rights Reserved. Designed & developed by Tulipshree Infotech